Fujitsu V3.1 Manual De Usuario
Figure 36: Create Network wizard (DCB Properties)
Enable DCB
Enables the DCB feature of the connection blade. The DCB (Data
Center Bridging) settings here are specific configuration settings in a
DCB-enabled switching device.
Center Bridging) settings here are specific configuration settings in a
DCB-enabled switching device.
This option should be enabled if this uplink set should be used for FCoE
(Fibre Channel over Ethernet).
(Fibre Channel over Ethernet).
Purpose
The purpose of the DCB setting. Possible values are FCoE and iSCSI.
Priority Level
The priority level. Possible values are 0 to 7; for FCoE this is by default
the value 3, for iSCSI the default value is 4.
the value 3, for iSCSI the default value is 4.
Bandwidth
The share of the bandwidth in percent that is assigned to this function. If
the sum of all bandwidths of one IO-channel is not 100, the values are
internally adjusted accordingly.
the sum of all bandwidths of one IO-channel is not 100, the values are
internally adjusted accordingly.
ServerView Virtual-IO Manager
173
5.4 Wizards