Fujitsu V3.1 Manual De Usuario
4
Configuration
In the following sections, you find information on the required configurations
on the managed server.
on the managed server.
4.1
Configurations on the managed BX600 Blade
Server
Server
In section
, you can find out what combinations of I/O connection blades are
supported by VIOM.
To manage a blade server with VIOM, you must carry out the following pre-
paratory steps:
paratory steps:
l
Configure the management blade or management blades, see section
l
Configure the I/O connection blades, see section
l
Define the connection of the IBP modules with the network, see section
l
Add the blade server to the server list of the ServerView Operations Man-
ager, see section
ager, see section
4.1.1
Supported hardware configurations for the connection
blades
blades
To define dedicated network connections for server blades with networks,
IBP modules are required.
IBP modules are required.
l
At least one IBP module must be installed in fabric 1 or in fabric 2 of the
blade server chassis.
blade server chassis.
l
To support a Fibre Channel mezzanine card, you must install a 4 GB Bro-
cade switch blade SW4016-D4 (Fibre Channel switch blade for BX600)
cade switch blade SW4016-D4 (Fibre Channel switch blade for BX600)
ServerView Virtual-IO Manager
97