Speco Technologies 16TH Manual De Usuario

User’s Manual 

DVR-4TH/8TH/16TH Series 

SPECO TECHNOLOGIES 07/10

 

98 

Otherwise, the <Device Setup> setting is completed.   
 

NOTE:  After changing any item under Device Setup menu, users 
MUST set <Apply> to <Yes> to apply the changes, or the settings will 

remain unchanged.   

 

Access this item and select <Yes> to activate the connection to the IP camera. 
To deactivate the connection, select <No>   
 

NOTE: Once the connection to the IP camera is activated, menu items 
<Hostname/IP>, <Model>, <Connection Setup> will be grayed out and 
cannot be accessed.   

 

After the connection to the IP camera is activated, users can check the 
connection status. The menu will be shown as below 

 

Status 

Model 
Resolution 
PPS 
Bandwidth 
Pkg. lost rate 

**** 

720*480 

10 

20 KB/Sec 

0.1% 

 

The information shown on the monitor is “ready only”.   
 

This item allows the user to copy the settings set on the current selected 
camera to any other connected cameras. Enter this menu and select one or 
more cameras to copy the settings. Then select <CONFIRM> to apply the 
settings.  
 

Copy Settings 

COPY TO: 

  10     11     12     13     14     15     16   

 

SELECT ALL  DESELECT ALL  CONFIRM  CANCEL