Coleman 2000000133 Prospecto

Connect Frame to Tent

– Insert one end of main tent pole 

onto pin of pin & ring system, at tent
corner. (illus. 3)

– Go to opposite end of pole and

gradually apply pressure to the pole
forming an arch until you are able to
insert the pin into the pole.

– Repeat for second pole. (illus. 4)

1

Layout & Positioning 
of Tent, Pole Assembly

– Layout and position tent with door 

facing desired direction. (illus. 1)

– Unzip door.
– Stake down tent corners only, using

the rings at the end of the stake loops.
(illus.2) Keep the floor taut.

– Assemble frame poles by 

interlocking shock-corded poles.
This will make two long poles.

– Insert the poles diagonally into pole

sleeves. The center of the poles should
cross forming an “X” in the middle of
tent. (illus. 1)

2

Assembled poles

inserted through 

pole sleeves

illus. 1

illus. 2

Tent stake through ring

illus. 3

Insert pole end onto 
pin & ring

illus. 4

Tent frame set-up

SUNDOME

®

7’x5’

– Select a level campsite clear of

rocks, branches and other hard 
or sharp objects.

– Do not set up your tent under trees.
– For best results in windy conditions,

do not position the door of tent 
into the wind.

Rainfly  Part No. 9180B3351

Instructions apply to Part Number 2000000133

Part No. 9180B3151

Part No. 9180B3251