Magnavox ZV427MG9 Manual De Usuario

TROUBLESHOOTING

Symptom

Remedy

DVD

The disc tray does not open when you
press [OPEN/CLOSE

A].

• It may take a few seconds for the disc tray to open after you have

recorded or edited a disc. This is because the unit is adding disc data to
the disc.

“Repairing” appears on the TV screen.

Repairing

formatting or editing (even after “Repairing” disappears), a repairing
process will begin automatically just after turning the unit on again.
It may take several minutes up to about several hours.

In a case you intend to cancel the
repairing process.

Repairing

Do you want to cancel a repairing
process? When selecting “Yes”,
the disc may not be usable.

Yes

• If you intend to cancel the repairing process, press [

AOPEN/CLOSE]

on the front panel, then select “Yes” and press [OK]. After that, press
[OPEN/CLOSE

A] to take out the disc. The disc canceled during the

repairing process MAY NOT work.

VCR

Picture noise appears.

• Head cleaning for VCR may be necessary. Refer to “Auto head cleaning”

(page 4).

• Adjust tracking control for better picture by pressing [TRACKING /

]

while you are playing back a cassette tape.

The cassette tape does not play back.

• No cassette tape is inserted.

Recording does not start after you press
[REC].

• Make sure the cassette tape has an erase-protection tab when you

record to a cassette tape. If needed, cover the hole with cellophane
tape.

The remote control does not function.

• Check if a cassette tape is in this unit.

The motor rotates even when
playback / recording is stopped.

• The motor may rotate for the duration of approximately 5 minutes for

efficient operation. This is not a malfunction.

E9P8CUD_ZV427MG9_B_OM_v1.indd 88

2012/03/01 13:07:20