Panasonic BT-LH1760P Manual De Usuario
36
This monitor permits remote operation via GPI/RS-232C terminal.
GPI screen items correspond to the following terminals. Use the GPI menu to assign functions to each terminal (
J page 29).
Functions assigned to terminals are executed when GND (pin 5) is short-circuited (ON) or open (OFF).
■ Operating conditions
Level operation: Operates when GND is short-circuited.
Edge operation: Operates when GND changes from
Edge operation: Operates when GND changes from
open to short-circuited.
* When level operation is assigned to more than one
terminal, the function operates as long as one of the
terminals is short-circuited.
terminals is short-circuited.
*1 When a 16:9 marker and a 4:3 marker are simultaneously selected and activated on a 16:9 aspect ratio display,
both markers are displayed.
*2 When a 16:9 marker and a 4:3 marker are simultaneously displayed, the background of the marker selected by
the 16:9 marker is controlled.
*3 When “R-TALLY” and “G-TALLY” simultaneously go on, the tally color changes to orange.
*4 This is only enabled when “RGB-VIDEO” is selected under “YP
*4 This is only enabled when “RGB-VIDEO” is selected under “YP
B
P
R
/RGB” in the “INPUT SELECT” menu.
GPI terminal
Pin number
Signal
1
GPI1
2
GPI2
GPI Terminal (9P)
3
GPI3
4
GPI4
5
GND
6
GPI5
7
GPI6
8
GPI7
9
GPI8
Assigned item
Function
Operating conditions
UNDEF
Undefined (no function assigned)
—
MARKER1
ON/OFF
ON/OFF
*1
Switches marker display defined in “GPI PRESET1”
(
(
J page 18) in the “MARKER” menu.
Level operation
(Short-circuited: ON, Open: OFF)
(Short-circuited: ON, Open: OFF)
MARKER2
ON/OFF
ON/OFF
*1
Switches marker display defined in “GPI PRESET2”
(
(
J page 18) in the “MARKER” menu.
Level operation
(Short-circuited: ON, Open: OFF)
(Short-circuited: ON, Open: OFF)
MARKER
BACK HALF
BACK HALF
*2
Reduces the brightness of the background outside the
marker displayed in “GPI PRESET1” (
marker displayed in “GPI PRESET1” (
J page 18) to 50%.
Level operation
(Short-circuited: ON, Open: OFF)
(Short-circuited: ON, Open: OFF)
MARKER
BACK BLACK
BACK BLACK
*2
Reduces the brightness of the background outside the
marker displayed in “GPI PRESET1” (
marker displayed in “GPI PRESET1” (
J page 18) to 0%.
Level operation
(Short-circuited: ON, Open: OFF)
(Short-circuited: ON, Open: OFF)
CENTER MARKER
Turns the center marker display on and off. (When
other markers are displayed, this marker is
superimposed on other markers.)
other markers are displayed, this marker is
superimposed on other markers.)
Level operation
(Short-circuited: ON, Open: OFF)
(Short-circuited: ON, Open: OFF)
INPUT SEL. VIDEO
Switches the input line to VIDEO.
Edge/level operation
INPUT SEL. SDI1
Switches the input line to SDI1.
Edge/level operation
INPUT SEL. SDI2
Switches the input line to SDI 2.
Edge/level operation
INPUT SEL.
YP
YP
B
P
R
/RGB
Switches the input line to YP
B
P
R
/RGB. Edge/level
operation
INPUT SEL. DVI-D
Switches the input line to DVI-D.
Edge/level operation
SD ASPECT
Sets the aspect ratio for SD signal input. (Disabled during
HD and PC signal input)
HD and PC signal input)
Level operation
(Short-circuited: 16:9, open: 4:3)
(Short-circuited: 16:9, open: 4:3)
SCAN
Switches the scan mode between “UNDER” and
“NORMAL”. (Disabled during PC signal input)
“NORMAL”. (Disabled during PC signal input)
Level operation (Short-circuited: UNDER,
Open: NORMAL)
Open: NORMAL)
R-TALLY
*3
Lights the red tally.
Level operation
(Short-circuited: ON, Open: OFF)
(Short-circuited: ON, Open: OFF)
G-TALLY
*3
Lights the green tally.
Level operation
(Short-circuited: ON, Open: OFF)
(Short-circuited: ON, Open: OFF)
MONO
Switches between color and monochrome (MONO).
(Disabled during PC signal input)
(Disabled during PC signal input)
Level operation (Short-circuited:
monochrome, Open: color)
monochrome, Open: color)
GAMMA SEL. FILM
Switches the gamma curve to FILM mode.
Level operation (Short-circuited: FILM
mode, Open: STANDARD mode)
mode, Open: STANDARD mode)
GAMMA SEL. STDIO/
PST
PST
Switches the gamma curve to STDIO/PST mode.
Level operation (Short-circuited: STDIO/
PST mode, Open: STANDARD mode)
PST mode, Open: STANDARD mode)
SELECT SYNC
*4
Selects the SYNC when using YP
B
P
R
/
RGB-VIDEO input.
Level operation
(Short-circuited: EXT, Open: INT)
(Short-circuited: EXT, Open: INT)
PIXEL TO PIXEL
Switches screen display between input size and
display size.
display size.
Level operation
(Short-circuited: ON, Open: OFF)
(Short-circuited: ON, Open: OFF)
REMOTE Specifications