Samsung SLM3320NDXAA Manual De Usuario

When the wireless function is off, the machine automatically tries to re-connect 

to the access point (or wireless router) with the previously used wireless 

connection settings and address.

 

In the following cases, the machine automatically re-connects to the 
wireless network:

•

The machine is turned off and on again.

•

The access point (or wireless router) is turned off and on again.

 

To cancel the wireless network connection when the machine is connecting to 

the wireless network, press and release the 

(Stop/Clear) on the control 

panel. You need to wait 2 minutes to re-connect to the wireless network.

To disconnect the wireless network connection, press the 

 (WPS) button on 

the control panel for more than two seconds.

•

When the Wi-Fi network is in idle mode: The machine is immediately 
disconnected from the wireless network and the WPS LED turns off.

•

When the Wi-Fi network is being used: While the machine waits until the 
current job is finished, the light blinks fast on the WPS LED. Then, the 
wireless network connection is automatically disconnected and the WPS 

LED turns off.

15 

 

Some menus may not appear in the display depending on options or 
models. If so, it is not applicable to your machine (see "Features by models" 
on page 8).

 

Before starting, you will need to know the network name (SSID) of your wireless 

network and the network key if it is encrypted. This information was set when 

the access point (or wireless router) was installed. If you do not know about your 

wireless environment, please ask the person who set up your network.