Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Toshiba
  4. 40UL605U
  5. Manual De Usuario

Toshiba 40UL605U Manual De Usuario

Descargar
Página de 82
Chapter 8: Using the TV’s network features
68
6無 
Press p or q to highlight 
Authentication, and 
then press t or u to select 
Open System, Shared 
Key, WPA-PSK or WPA2-PSK.
7無 
Press p or q to highlight 
Encryption, and then 
press t or u to select 
None, WEP, TKIP or AES.
Note: 
 
• Certain encryption types are only compatible 
with specific authentication types.
 
− When Authentication is Open System, only 
WEP or None is compatible.
 
− When Authentication is Shared Key, only 
WEP is compatible.
 
− When Authentication is WPA-PSK or WPA2-
PSK, only TKIP or AES is compatible.
 
• When incompatible Authentication/Encryption 
pairings are attempted, a warning message 
will be displayed, and no connection attempt 
will be made until the incompatibility is 
resolved.
 
• Key ID of WEP encryption to set is only one.
8無 
Press p or q to highlight 
Security Key, and press 
. The Software Keyboard window will appear.
9無 
Input the Security Key by using the Software 
Keyboard ( page 70). To save your setting, 
press the 
BLUE button.
Note: 
This item is grayed out when 
Encryption
 is 
None
. 
10無 
Highlight 
Done, and then press  .
Note: 
When 
Encryption
 is 
None
, a message 
will appear. Press t or u to select 
Yes
 and 
press  .
Note:
 Settings are not saved if   is pressed 
before 
Done
 is selected.
Wireless Information
The settings configured in 
Wireless Setup can be 
confirmed.
1無 
Press   and open the 
Quick menu.
2無 
Press p or q to select 
Wireless Information, and 
press  .
3無 
When the AP connection succeeds, a Wireless 
Information window will appear.
Note: 
Press the
 RED
 button if you confirm 
the situation of surrounding APs.
Item
Description
Status
Connected is displayed when the 
TV is connecting with the AP.  
Disconnected is displayed when the 
TV is disconnecting with the AP.
Signal
Connection signal strength with AP
(
STRONG / MEDIUM / WEAK)
Speed
The link speed with AP
Mode
Working mode (11a, 11b, 11g, 11n)
Channel
A channel in use (1-165)
Network Name SSID set
Authentication
Authentication set
Encryption
Encryption set
Security Key
Security Key set
AP MAC
Address
The AP’s MAC address is displayed
when the TV is connecting with AP.
USB MAC
Address
The MAC address of USB (Dual 
Band WLAN Adapter) is displayed.
DHCP
Enabled is displayed when you use 
DHCP. 
Disabled is displayed when you do 
not use DHCP.
IP Address
The TV’s IP address
Subnet Mask
Value of the Subnet Mask
Default 
Gateway
Address of the Default GATEWAY
DNS
Address of the DNS
Note:
 Even if AP for IEEE 802.11n is used when 
Encryption
 is set to 
WEP
 or 
TKIP
, the Speed 
value might be low. 
Encryption
 is recommended 
to be changed to 
AES
 ( left-hand column).
(continued)