VIZIO E472VL Manual De Usuario
18
5
E472VL / E552VL
Changing the Advanced Network Settings
Advanced users can fine-tune the network settings using the Manual Setup
feature.
Advanced users can fine-tune the network settings using the Manual Setup
feature.
To change advanced network settings:
1. From the Network Connection menu,
highlight
Manual Setup and press
OK. The Change Settings menu is
displayed.
displayed.
2. Use the
Arrow and OK buttons to
adjust each setting:
• DHCP - (Dynamic Host
• DHCP - (Dynamic Host
Configuration Protocol) This setting
must be turned Off to change any
of the other settings.
must be turned Off to change any
of the other settings.
• IP Address - The IP address
assigned to the TV.
• Subnet Mask - The subnet mask.
• Default Gateway - Your network’s
• Default Gateway - Your network’s
default gateway address.
• Pref. DNS Server - Your preferred
domain name server address.
• Alt DNS Server - Your alternate domain name server address.
3. If you need the RJ45 (ethernet) MAC address or the Wireless MAC address
to set up your network, these are displayed at the bottom of the Change
Settings menu.
Settings menu.
4. Press the
EXIT button on the remote.
Testing Your Network Connection
To test your network connection:
To test your network connection:
1. From the Network Connection menu, highlight
Test Connection and press
OK.
2. The Test Connection screen displays the connection method, network
name, signal strength, and download speed of your network connection.
3. Press the
EXIT button on the remote.
Changing the TV Settings
Using the settings menu, you can:
• Change the input source
• Set up the TV tuner
• Name the TV inputs
• Set up parental controls
• Change the on-screen menu
• Set up the TV tuner
• Name the TV inputs
• Set up parental controls
• Change the on-screen menu
language
• Set the time
• Adjust the CEC settings
• Adjust the VIZIO logo settings
• Adjust the CEC settings
• Adjust the VIZIO logo settings
Changing the Input Source
To quickly access the Input Source menu, press the INPUT button
on the remote.
on the remote.
To change the input source from the Settings menu:
1. Press the
MENU button on the remote. The on-screen menu is displayed.
2. Use the
Arrow buttons on the remote to highlight the Settings icon and
press
OK. The Settings menu is displayed.
3. Highlight
Input Source and press OK. The Input Source menu is displayed.
4. Highlight the input source you want to display and press
OK.