VIZIO VP50HDTV Manual De Usuario

VIZIO VP50HDTV User Manual 

Version 4/17/2007 

31 

 

www.VIZIOCE.com 

Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections 
are secure.  Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge 
protector. 

 

1. 

Press the power button on the remote or on the side of the Plasma TV.  The status LED on 
the front will change to solid green. 

2. 

There are 4 options for selecting your programming: 

a.  If you are using an antenna or cable connected through the DTV CABLE/ANTENNA input, 

you can select DTV using the INPUT button on the side of the Plasma TV. 

b.  If you are using an antenna or cable connected through the TV CABLE/ANTENNA input, 

you can select TV using the INPUT button on the side of the Plasma TV. 

c.  If you are watching broadcasts through a cable or satellite set-top box connected by an 

HDMI cable, select HDMI using the INPUT button on the side of the Plasma TV. 

d.  If you are watching broadcasts through a cable or satellite set-top box connected by a 

Component (YPbPr) cable, select Component 1 or Component 2 using the INPUT button 
on the side of the Plasma TV. 

 

 

 

 

3. 

Press the Channel buttons on the remote or the +/- buttons on the side of the Plasma TV to 
change the channel.  

Note: The Channel buttons, on the side of the Plasma and on the 

remote, control will not work if you are watching a program using HDMI 1 HDMI 2, 
Component 1, Component 2, AV1 or AV2 inputs.

 

 

 
Volume 
To increase the volume, press and hold the VOL+ or VOL- button on the side of the Plasma TV or remote 
control until the desired level is reached. 

 
TV Channels 
To step up or down through the available TV channels, press the CH+ or CH- button on the side of the 
Plasma TV or remote control once for the next or previous channel, or hold it depressed until the desired 
channel is reached.  

Note: Channel up and down will only operate in DTV and TV modes.

 

 
Wide 
Using this feature, you can watch video content in different size modes on the TV.  Press the WIDE 
button on the remote control to switch among the modes. 

Fore more information see Section 3.5.11. 

 

Note: You should be able to see a picture.  If you do not, make sure that all of the Plasma TV 
connections are secure and you have selected the correct video input source.