VIZIO VP50HDTV Manual De Usuario

VIZIO VP50HDTV User Manual 

Version 4/17/2007 

8 

 

www.VIZIOCE.com 

 

 
Power LED – Lights green when powered on, yellow 
when powered off. 

 
Remote Control Sensor – This is the window through 
which all of the remote control signals pass to the 
sensor.  Point the remote control directly at this 
window for the best response to the remote signal. 

 

 

 

 

 ) – Switch the VP50HDTV on by pressing the button once.  

Press the button again to the VP50HDTV off.  

 
Menu – This button activates the On Screen Display (OSD).  If a sub-
menu is active, pressing this button will return to the previous menu level. 

 
Channel ▲/▼ – Use these buttons to step up or down the TV channels.  
While the OSD is active, these buttons function as up and down controls 
in the OSD menus. 

 
Volume  ◄/► – Use these buttons to increase or decrease to the 
speaker volume.  While the OSD is active, these buttons function as left 
and right controls in the OSD menus.  

 
Input (Enter) – Repeated pressing of this buttons steps through the 
input sources in the following sequence: DTV, TV, RGB, AV1 (S-Video or 
video*), AV2 (S-Video or video*), Component 1, Component 2, HDMI 1, 
and HDMI 2. Once you have stepped through the entire sequence, you 
will return to the beginning. 

 

Additionally, when the OSD is active, this button confirms the menu function to be adjusted.  When the 
OSD is not active, pressing this button will display the current input mode.