VIZIO VW26L Manual De Usuario
VIZIO VW26L HDTV10F User Manual
Version 2/6/2007
27
www.VIZIO.com
3.2
Watching a TV Program
Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections
are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge
protector.
are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge
protector.
1.
Press the power button on the remote or on the side of the HDTV. The red light on the HDTV
logo on the stand will turn off. It can take up to 10 seconds before the picture appears.
logo on the stand will turn off. It can take up to 10 seconds before the picture appears.
2.
There are 3 options for selecting your programming:
a. If you are using an antenna or cable connected through the DTV/TV CABLE/ANTENNA
a. If you are using an antenna or cable connected through the DTV/TV CABLE/ANTENNA
input, you can select TV directly by pressing the TV button on the remote, or by pressing
the INPUT button on the remote or on the side of the HDTV.
the INPUT button on the remote or on the side of the HDTV.
b. If you are watching broadcasts through a cable or satellite set-top box connected by an
HDMI cable, select HDMI directly by pressing the HDMI button on the remote, or by
pressing the INPUT button on the remote or on the side of the HDTV.
pressing the INPUT button on the remote or on the side of the HDTV.
c. If you are watching broadcasts through a cable or satellite set-top box connected by a
Component (YPbPr) cable, select Component directly by pressing the Component button
on the remote, or by pressing the INPUT button on the remote or on the side of the HDTV.
on the remote, or by pressing the INPUT button on the remote or on the side of the HDTV.
3.
When using option 2a, press the Channel buttons on the remote or the +/- buttons on the side
of the HDTV to change the channel.
of the HDTV to change the channel.
Note: The Channel buttons, on the side of the HDTV
and on the remote, control will not work if you are watching a program using HDMI,
Component and AV inputs.
Component and AV inputs.
3.3
Adjusting Basic HDTV Settings
Volume
To increase the volume, press and hold the VOL+ or VOL- button on the side of the LCD HDTV or remote
control until the desired level is reached.
TV Channels
To step up or down through the available TV channels, press the CH+ or CH- button on the side of the
HDTV or remote control once for the next or previous channel, or hold it depressed until the desired
channel is reached.
Note: Channel up and down will only operate in DTV and TV modes.
Wide
Using this feature, you can watch video content in different size modes on the HDTV. Press the WIDE
button on the remote control to switch among the modes.
Fore more information see Section 4.17 - Understanding Viewing Modes, on page 47.
Note: You should be able to see a picture. If you do not, make sure that all of the
HDTV connections are secure and you have selected the correct video input source.
HDTV connections are secure and you have selected the correct video input source.