VIZIO E190MV Manual De Usuario

Descargar
Página de 51
VIZIO 
E190MV/E220MV User Manual 
 12  
www.VIZIO.com 
Chapter 3 VIZIO Remote Control 
Installing the Batteries 
1.  Remove the battery cover. 
2.  Insert two AAA batteries into the remote control. 
Make sure that you match the (+) and (-) symbols on 
the batteries with the (+) and (-) symbols inside the 
battery compartment. 
3.  Replace the battery cover. 
 
Precautionary Tips for Inserting the Batteries: 
  Only use Alkaline AAA batteries. 
  Do not mix new and old batteries. This may result in cracking or leakage that may cause 
a fire or lead to personal injury. 
  Inserting the batteries incorrectly may also result in cracking or leakage that may cause a 
fire or lead to personal injury. 
  Dispose of batteries according to local hazardous waste regulations. 
  Keep the batteries away from children and pets. 
 
Remote Control Range 
  Point the remote control directly at this sensor 
for the best response to the remote signal. 
  Do not place any obstacles between the remote 
control and the remote control sensor. 
  The effective range of the remote control is 
approximately 22 feet (7 meters) from the front 
of the remote control sensor, 30° to the left and 
right, 20° up and down. 
 
VIZIO Remote Control Precautions 
  The remote control should be kept dry and away from heat sources.  Avoid humidity. 
  If the TV responds erratically to the remote control or does not respond at all, check the 
batteries.  If the batteries are low or exhausted, replace them with fresh batteries. 
  When not using the remote control for a long period of time, remove the batteries. 
  Do not take the batteries apart, heat them, or throw them into a fire. 
  Do not subject the remote control to undue physical stress, such as striking or dropping it. 
  Do not attempt to clean the remote control with a volatile solvent.  Wipe it with a clean, 
damp cloth.