SCOTT LCT37SHA Manual De Usuario

Operating Instructions

6. Basic Operation

6.1 Power ON/OFF

6.2 Selection of Input Mode

The Display is in Standby mode.

- Press the

Standby on the

remote control or on the control

panel to turn on the unit. The

power indicator changes from red

to green.

- Press the

Standby on the

remote control or on the control

panel again to return the display to

standby mode.

The power indicator changes from

green to red.

Note: For protecting your LCD TV

product, the interval time between

turn on the LCD TV product and

shut down it should be kept at

least one minute.

- Press Source on the remote control

or on the LCD TV control panel to

select the signal source you desired.

When no input from the selected

Source

Standby

signal source, “No signal” will appear, press

Source on the remote control or on

the control panel again to search the next source.

Note:

The LCD-TV will automatically turn itself off after approximately 15 minutes if no

signal input. When no signal is inputted for about 14 minutes. A “No signal and

going to power down” wording will appear.