GE 0150-0193G Manual De Usuario

0150-0193G 

58 

DVMRe Triplex 

1.  With the Modem Init String highlighted, press the Enter button to enter the Edit mode.  The 

character bank will appear in the center of the menu. 

2.  Press the Sequence button to select the desired character bank. 

3.  Rotate the Shuttle to navigate the Modem Init String. 

4.  Rotate the Jog to select a character from the character bank. 

5.  Use the Number 2 button or rotate the Shuttle to insert the desired character from the character 

bank into the Modem Init String and advance to the next character. 

6.  Use the Number 1 button to insert a blank character. 

7.  When finished, press the Enter button. 

8.  To save the changes and reboot, select OK, then press the Enter button.  The unit will only reboot 

if changes were made to the Modem Init String. 

9.  To exit the menu without making changes, select Cancel, then press the Enter button.  Pressing 

the Menu button also exits the menu without making changes. 

Use this menu to configure the baud rate for Port 1.  Rotate the 
Jog to select a baud rate from the menu. 
Save changes and exit the menu:  Press the Enter button. 
Exit the menu without making changes:  Press the Menu button. 

 

 

Use this menu to configure the baud rate for Port 2.  Rotate the 
Jog to select a baud rate from the menu. 
Save changes and exit the menu:  Press the Enter button. 
Exit the menu without making changes:  Press the Menu button. 

The RS232 port 2 is used for Event Generation and ASCII Text  
Insertion. See Section 7 for the RS232 Protocol required to perform  
these functions. 

 

q 

Connect several units to a single keyboard, or vice-versa.  Up to  
32 units (any combination of multiplexers and keyboards) can be  
networked together.  Use this menu to specify the units unique network address. 

Save changes and exit the menu:  Press the Enter button. 
Exit the menu without making changes:  Press the Menu button.