Honeywell HRHD 410 Manual De Usuario
Configuration
Rev 3.01
66
Document 900.0315
10/05
Note
When using the NAT device, refer to the NAT manufacturer’s
instructions for the appropriate network settings.
instructions for the appropriate network settings.
5.
Highlight the box beside DVR Name and then press # to name the DVR to be
registered on the DVRNS server. A virtual keyboard allows you to enter the DVR
name.
registered on the DVRNS server. A virtual keyboard allows you to enter the DVR
name.
6.
Selecting Check allows you to check whether or not the name you entered can be
used.
used.
Note
The DVR name you entered should be checked by selecting
Name Check; otherwise, the DVRNS changes will not be saved.
Name Check; otherwise, the DVRNS changes will not be saved.
When entering no name or a name already registered on the
DVRNS server, an error message displays.
DVRNS server, an error message displays.
7.
Highlight OK and then press # to register the DVR on the DVRNS server. Proper
DVRNS settings display the help desk information of the DVRNS server in the box
beside Help Desk.
DVRNS settings display the help desk information of the DVRNS server in the box
beside Help Desk.
Caution
If you want to use the same DVR name registered on the DVRNS
server after initializing the system using the factory reset, you
need to contact the DVRNS server manager. Please record and
save the help desk information before performing a factory reset.
server after initializing the system using the factory reset, you
need to contact the DVRNS server manager. Please record and
save the help desk information before performing a factory reset.
The DVRNS registration is limited to one DVRNS server. The DVR cannot be registered
to multiple DVRNS servers. Please contact your network administrator when you want
to register the DVR to another DVRNS server.
to multiple DVRNS servers. Please contact your network administrator when you want
to register the DVR to another DVRNS server.