Brother MFC-7360 Manual De Usuario
Troubleshooting
71
B
Not Available
The requested function is not
permitted to all IDs by Secure
Function Lock 2.0.
permitted to all IDs by Secure
Function Lock 2.0.
Contact your administrator to check your
Secure Function Lock Settings.
Secure Function Lock Settings.
Out of Memory
The machine’s memory is full.
Fax sending or copy operation in
progress
progress
Do one of the following:
Press Start to send or copy the scanned
pages.
pages.
Press Stop/Exit and wait until the other
operations in progress finish, and then
try again.
operations in progress finish, and then
try again.
Clear the faxes from the memory.
Print the faxes that are stored in the
memory to restore the memory to 100%.
Then turn off Fax Storage to avoid
storing more faxes in the memory. (See
Printing a fax from the memory in
Chapter 4 of the Advanced User's Guide
and Fax Storage in Chapter 4 of the
Advanced User's Guide.)
memory to restore the memory to 100%.
Then turn off Fax Storage to avoid
storing more faxes in the memory. (See
Printing a fax from the memory in
Chapter 4 of the Advanced User's Guide
and Fax Storage in Chapter 4 of the
Advanced User's Guide.)
Print operation in process
Do one of the following:
Reduce the print resolution. (See Basic
tab in the Software User’s Guide.)
tab in the Software User’s Guide.)
Clear the faxes from the memory. (See
the above explanation.)
the above explanation.)
Print Unable XX
The machine has a mechanical
problem.
problem.
Do one of the following:
(For MFC-7360 and MFC-7460DN )
Transferring your faxes or Fax Journal
report on page 73 before disconnecting
the machine so you will not lose any
important messages. Then, disconnect
the machine from the power for several
minutes and then reconnect it.
Transferring your faxes or Fax Journal
report on page 73 before disconnecting
the machine so you will not lose any
important messages. Then, disconnect
the machine from the power for several
minutes and then reconnect it.
(For MFC-7860DW)
Disconnect the machine from the power
for several minutes, then reconnect it.
Disconnect the machine from the power
for several minutes, then reconnect it.
If the problem continues, call Brother
Customer Service.
Customer Service.
Replace Drum
It is time to replace the drum unit. Replace the drum unit.
The drum unit counter was not
reset when a new drum was
installed.
reset when a new drum was
installed.
Reset the drum unit counter.
Error Message
Cause
Action