SVAT Electronics CLEARVU10 Manual De Usuario

now you can see

MAKING CHANGES TO THE MOTION SENSOR MENU

1.  After saving any desired changes to other 

menus, click the MOTION SENSOR title on 
the left hand side of the window.

2.  You will see a list of each camera, its
 

 sensitivity level, and an AREA SETUP button.

3.   To make changes to the sensitivity level, 

use the mouse to click the sensitivity 
level (1, 5, etc) of the camera you wish to 
change.  You will see the outline of the 
status turn green.

4.  Use the    buttons to choose a new level.  

The sensitivity ranges are between 1 and 
10, with 1 having the lowest sensitivity 
to movement (meaning a lot of motion 
is required to trigger recording) and 10 having the highest sensitivity to movement (meaning that minimal movement is required to trigger 
recording).  The default for each camera is 5.

  

TIP:  You can enable and disable specific areas of your monitoring locations to detect motion.  For example, if you have a camera 

 

monitoring a high-traffic hallway with several entrances, you can go into the AREA SETUP menu for each camera and disable 

 

areas so that movement from specific entrances does not trigger recording.  For more information, refer to ADJUSTING AREA 
SETUP, below.