Philips DVDR9000H Manual De Usuario

77

(underlined options are the factory default settings)

You will be prompted to enter the four-digit pin code.
–  When doing this for the fi rst time, use the alphanumeric keypad 0-9 

on the remote control to enter any four-digit pin code you prefer. 

–  If you forget your four-digit pin code, key in ‘1504’. Then enter any 

four-digit you prefer and enter the same pin code again to confi rm it.

Childlock 

With this feature, you can prevent children from viewing certain discs or 

the recorded titles in the HDD.  When this feature is enabled, it will 
appear as { CHILDLOCK } at the bottom of the coloured options screen 
whenever you select a title in the content menu.  You can press the 
Yellow button on the remote control to set the childlock on or off.  
Note:  This recorder can memorise settings for 50 discs.

{ On } 

–  Turns on child lock function. 

 

 

  

A four-digit pin code must be entered in order to play 
the locked disc or title in the HDD.

{ Off } 

–  All discs can be played.

Change pin 

Use the alphanumeric keypad 0-9 to enter your new four-digit pin code.

 

You must enter the same pin code again to confi rm it. 

 

To cancel your change, press 

 to select { Cancel } in the menu and 

press OK on the remote control.

(underlined options are the factory default settings)

Auto resume 

With this feature, you can resume playback of the disc from where it last 
stopped point.  This applies to the last 20 DVDs and Video CDs you 
played.

{ On } 

–  Turns on auto resume mode.

{ Off } 

–  The disc will always start from the beginning when you 

load a disc or start playback.

####

dvdr9000h_eu_eng2.indd   77

dvdr9000h_eu_eng2.indd   77

2005-10-13   9:18:21 AM

2005-10-13   9:18:21 AM