RGB Spectrum DGy 201x Manual De Usuario

. . . . .

This region indicates the selected disk drive and the amount of 
disk space remaining in H:M:S (hour:minutes:seconds).

Indicates the currently selected mounted disk, internal or 
remote.

This bar visually indicates the available record time on the 
selected disk drive. The blue area represents the used portion of 
the disk as a percentage of the whole.

Click 

 to pause a recording. The   symbol 

appears in the status area. To resume recording click on the 

 or 

 button.

The recording will use the parameters established on the 

 on page 39.

The recording will be stored using the 

 and 

. See below for details.

The   symbol appears in the status area. When recording 
begins, the DGy 201x records the visuals from the graphics 
input port.

If autonaming is enabled, recording begins immediately. If the 
clip name has already been used, you will be asked to confirm 
to overwrite the clip.

This area indicates the name of the clip currently recording. 
Click the 

 label to display the Clip Browser to 

select clips for playback or recording. Refer to the 

 on page 35 for details. 

This area indicates the path of the current clip. Click the 

 label to display the Clip Browser. Use the browser to 

select clips for recording and set the desired path. Refer to the 

 on page 35 for details. 

Click the 

 button to halt the recording.

Recording must precede playback when operating in 
simultaneous record/playback mode. Press 

in 

the player control panel.