Swann SW242-9SN Manual De Usuario

 
 
 
 
 
 
 
 
 
 

Note: If a camera channel is set to off it will not record (Refer to 6.4 Record Setup) 

 

 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 

Press ▲, ▼, ◄ or ► button to select a channel, and then press [SEL] to increase the 

value or press [■STOP] to reduce the value. 

Note: Higher frame rate shows smooth images but requires more hard drive space. 

 

Camera Setup allows you to turn 

cameras on or off. 

Press ▲, ▼, ◄ or ► button to select a 

channel and then press [SEL] to modify the 
setting ON or OFF. 

Record Setup allows you to set up 

recording channels.   

Press ▲, ▼, ◄ or ► button to select a 

channel, and then press [SEL] to modify the 
setting to ON or OFF. 

If a channel is disabled in Camera 

Setup, it will not record and the DVR will 
display “NOCAM” on screen. 

The total frame rate is 50fps (PAL) or 

60fps (NTSC). If the sum of the frame rate 
you select for all cameras is greater than 
50fps (PAL) / 60fps (NTSC), the DVR will 
automatically adjust the largest frame rate 
value to a smaller value.