Samsung SVR-1670 Manual De Usuario

Digital Video Recorder        User Guide

Digital Video Recorder        User Guide

To use the SVR-1670 safely, please install the SVR in a rack using the enclosed rack mounts. Follow
these instructions to install the SVR-1670 in a rack.

1. 

Attach the enclosed rack mounts to the product.

2. 

Attach the enclosed rack mounts to the product.

This section discusses the proper handling of wires and cables when connecting sensors, relays and 
other devices to the SVR-1670.

You might need to prepare cables before connecting them to terminal blocks. Different wire gauges 
are needed for stranded wire or solid wire. Prepare the end of the wire by removing the following 
amounts of insulation:

· Stranded wire :  Strip 1/3 ~ 1/2" (8 ~ 10mm) of insulation off the end of the wire and solder it together. 

Use AWG 22 ~ 26 wire.

· Solid wire :  Strip 1/3 ~ 1/2" (8 ~ 10mm) of insulation off the end of the wire. Use AWG 20 ~ 26.

Figure 3.2.1 Preparing Cables for Terminal Blocks

Figure 3.2.2 Inserting and Removing Wires

• Basic Connection Diagram
• Connecting Cameras
• Connecting a Monitor
• Connecting Audio
• Connecting the Power Cable

 Always turn off the SVR-1670 and disconnect the power cord from its power source before 
you connect devices to the SVR-1670. 

When inserting or removing a wire from a terminal block, do it while holding down the terminal block 
with a screw driver.

Rack Mount

Rack

Rack Mount