Coleman 9392-142 Prospecto

3

Stake Down Shelter

a) Adjust poles to pull shelter taut

and insert larger stake
downward through fabric
loop at end of each pole
(Illus. 5).

b) Attach guylines to

fabric and stake
down using metal
stakes (Illus. 6).

2

Rev. 3/04

Things You Should Know

• 

Never store shelter, even for a short period of time, without drying 

thoroughly and brushing off caked dirt. Do not pack stakes or poles inside
your shelter. Use separate storage bag.

• 

STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE ITSELF.

NEVER PULL ON FABRIC OR STAKE LOOP TO REMOVE STAKE.

• 

POLES SHOULD NOT BE LEFT TELESCOPED TOGETHER DURING

STORAGE.

• 

Do not leave your shelter set up for weeks at a time. Be aware that

exposure to ultraviolet rays of the sun can seriously damage material
and/or cause it to become discolored.

WARNING: KEEP ALL FLAME AND HEAT SOURCES 
AWAY FROM SHELTER FABRIC. This shelter meets the flammability
requirements of CPAI-84. Fabric will burn if left in continuous contact with
any flame source. Application of any foreign substance to the fabric may
cause flame-resistant properties to become ineffective.

THE COLEMAN CO., INC.

3600 N. Hydraulic • Wichita, Kansas 67219

1-800-835-3278  •  www.coleman.com

Attach Shelter to Frame

a) Clip center of shelter roof to bottom 

of hub.

b) Clip shelter to frame, positioning 

doors in desired direction (Illus. 3).

c) Corners have two clips, so snap

one into clip bracket.

d) To fully extend each pole, interlock 

all shock-corded pole sections.

e) Insert straight pin into base of pole 

(Illus. 4).

Illustration 3

Illustration 6 

Assembled shelter 
with guylines extended.

Illustration 4 

Insert straight pin into
base of pole

Illustration 5 

Insert stake through  

stake loop

Guyline