Cisco Systems 8300 Manual De Usuario

7

If the DVR does not perform as expected, the following tips may help. If you need 
further assistance, contact your service provider.

•  Verify that the power to your TV is turned on. 

•  If the DVR is plugged into a wall switch, verify the wall switch is in the ON position.

  Note: You should avoid plugging the DVR into an outlet that is controlled by a wall 

switch.

•  Verify that all cables are properly connected. 

•  If your system includes a VCR or stereo, verify that you have properly connected 

them to the DVR. 

•  Verify that the TV is set to the proper input channel. 

•  Verify that the current TV program is broadcast in color. 

•  Adjust the TV color controls.

•  If your setup includes a stereo, verify that you have properly connected it to the 

DVR.

•  Verify that the volume is turned up. 

•  Verify that the Mute function is not engaged.

The TV screen may display a message that indicates the DVR is automatically 
updating its software. Should this occur, wait for the time to appear on the front panel 
of your DVR before continuing. When the time appears, the update is complete.

The diagrams are on pages 8 through 11 of this guide. The diagrams show examples 
of common ways to connect the DVR to your TV, VCR, and home theater receiver. 
However, these diagrams do not show every possible combination of devices. Refer 
to the user guides that came with your other electronic devices for further information.

The required cables are shown in the connection diagrams in this guide. Some of the 
cables and adaptors shown in the diagrams may not be included with the DVR.