Coleman 9260D727 Prospecto

Connect Frame to Tent

– Insert one end of main tent pole end onto

pin of pin & ring system, at tent 
corner. (illus. 3)

– Go to opposite end of pole and 

gradually apply pressure to the pole
forming an arch until you are able to
insert the pin into the pole.

– Repeat for second pole.

Cimarron

™

3 7’x 7’ 

plus Vestibule

1

Layout & Positioning 
of Tent, Pole Assembly

– Layout and position tent with door 

facing desired direction. (illus. 1)

– Unzip door.
– Stake down tent corners only, using the

rings at the end of the stake loops. 
Keep the floor taut. (illus. 2)

– Assemble frame poles by 

interlocking shock-corded poles. 
This will make two long poles. 

– Insert the poles diagonally into pole

sleeves.The center of the poles should
cross forming an “X” in the middle of
tent. (illus. 1)

2

– Select a level campsite clear of rocks,

branches and other hard or sharp objects. 

– Do not set up your tent under trees. 
– For best results in windy conditions,

do not position the door of tent into
the wind.

Rainfly Part No. 9260D7211

Assembled
poles
inserted
through 
pole 
sleeves

Instructions apply to Part Number 9260D727

illus. 1

illus. 2 

Tent stake

through ring

illus. 3

Insert pole end onto 
pin & ring

illus. 4

Tent frame 

set-up

Part No. 9260D7221

Part No. 9260D7231