Coleman 3000000101 Prospecto
Follow instructions and warnings to avoid fires, serious injury, or death.
WARNING:
1. Coleman
®
fuel is extremely flammable; handle with care. Fuel vapors are invisible, explosive, and can be ignited by ignition sources many
feet away.
2. This lantern is designed to use Coleman
2. This lantern is designed to use Coleman
®
fuel. Never use kerosene or automotive fuel.
3. Store fuel in a clean, properly marked container away from flame (including pilot lights), other sources of ignition, or excessive heat.
4. Always fill outdoors. Never fill lantern, loosen or remove fuel cap while lantern is lighted, near flame (including pilot lights), other ignition sources,
or while top of lantern is hot to touch.
5. Always light and use lantern outdoors; never inside house, camper, tent, or other unventilated or enclosed areas.
6. This lantern consumes air (oxygen). Do not use in unventilated or enclosed areas to avoid endangering your life.
7. Keep lantern away from flammables. Never allow fabric, clothing, or any flammable material to come within 4 ft. (1.2 m) of the top and 1 ft. (.3 m)
of the side of the lantern.
8. Use for lighting only. Never alter in any way or use with any device or part not expressly approved by Coleman. Do not use as a space heater.
9. Replace any mantle with a hole in it. A hole can cause lantern to overheat and create a hazard.
10. Keep out of reach of children.
4. Always fill outdoors. Never fill lantern, loosen or remove fuel cap while lantern is lighted, near flame (including pilot lights), other ignition sources,
or while top of lantern is hot to touch.
5. Always light and use lantern outdoors; never inside house, camper, tent, or other unventilated or enclosed areas.
6. This lantern consumes air (oxygen). Do not use in unventilated or enclosed areas to avoid endangering your life.
7. Keep lantern away from flammables. Never allow fabric, clothing, or any flammable material to come within 4 ft. (1.2 m) of the top and 1 ft. (.3 m)
of the side of the lantern.
8. Use for lighting only. Never alter in any way or use with any device or part not expressly approved by Coleman. Do not use as a space heater.
9. Replace any mantle with a hole in it. A hole can cause lantern to overheat and create a hazard.
10. Keep out of reach of children.
Filling the lantern
Always fill outdoors. Never fill lantern,
loosen or remove fuel cap while
lantern is lighted, near flame (including
pilot lights), other ignition sources, or
while top of lantern is hot to touch.
■ Turn FUEL VALVE to OFF.
loosen or remove fuel cap while
lantern is lighted, near flame (including
pilot lights), other ignition sources, or
while top of lantern is hot to touch.
■ Turn FUEL VALVE to OFF.
■ Close PUMP KNOB firmly.
Turn in direction of arrow.
Turn in direction of arrow.
■ Remove FUEL CAP.
Use a funnel or suitable
filling device and fill
with clean, fresh fuel.
Lantern must be in a
level position.
DO NOT TIP.
Use a funnel or suitable
filling device and fill
with clean, fresh fuel.
Lantern must be in a
level position.
DO NOT TIP.
■ Replace FUEL CAP
on lantern and on fuel
container. Tighten firm-
ly. WIPE UP ANY
SPILLED FUEL AND
DISPOSE OF IN A
SAFE PLACE.
container. Tighten firm-
ly. WIPE UP ANY
SPILLED FUEL AND
DISPOSE OF IN A
SAFE PLACE.
To tie on mantles
Always use genuine Coleman
®
mantles. Replace damaged
mantles to avoid overheating or
damaging lantern.
■ Unscrew BALL NUT at top
of lantern and remove
VENTILATOR and
GLASS GLOBE
mantles to avoid overheating or
damaging lantern.
■ Unscrew BALL NUT at top
of lantern and remove
VENTILATOR and
GLASS GLOBE
.
■ Tie mantle around groove in
BURNER and cut off ends of string
1/4" (.64 cm) from knot.
BURNER and cut off ends of string
1/4" (.64 cm) from knot.
■ Light bottom of MANTLE
evenly (move match back
and forth) and leave to burn.
Once mantle has been
burned it is very fragile. Be
careful not to touch it with
your finger or with a match.
evenly (move match back
and forth) and leave to burn.
Once mantle has been
burned it is very fragile. Be
careful not to touch it with
your finger or with a match.
■ Replace the
GLASS GLOBE,
VENTILATOR and
BALL NUT.
GLASS GLOBE,
VENTILATOR and
BALL NUT.
Pumping
■ Be sure FUEL VALVE is OFF and FUEL
CAP is firmly closed.
CAP is firmly closed.
■ Open PUMP KNOB by turning 1 full turn to the left.
■ Cover hole in pump knob with
thumb and pump approximately
30 full strokes.
thumb and pump approximately
30 full strokes.
■ Close PUMP KNOB.
Lighting the lantern
Always light and use your lantern outdoors; never in house,
camper, tent or other unventilated or enclosed areas.
■ Push a lit match through lighting hole and turn fuel valve to
high. CAUTION: Flames other than at mantles indicate flooding
or a leak. Turn FUEL VALVE OFF, allow flames to burn out and
lantern to cool. Carefully review instructions and correct problem
before relighting lantern.
camper, tent or other unventilated or enclosed areas.
■ Push a lit match through lighting hole and turn fuel valve to
high. CAUTION: Flames other than at mantles indicate flooding
or a leak. Turn FUEL VALVE OFF, allow flames to burn out and
lantern to cool. Carefully review instructions and correct problem
before relighting lantern.
■ Adjust FUEL VALVE to
desired brightness.
■ To clean GENERATOR
TIP, turn FUEL VALVE
from high to off to high
several times.
desired brightness.
■ To clean GENERATOR
TIP, turn FUEL VALVE
from high to off to high
several times.
To Turn Off
■ Turn the lantern off by
turning FUEL VALVE to
“OFF”. Light will dim and
go out in 1-2 minutes.
turning FUEL VALVE to
“OFF”. Light will dim and
go out in 1-2 minutes.