Bosch 430 Manual De Usuario

en | Safety

Video Recorder 430/451 Series

F.01U.168.054 | v2.0 | 2012.05

Installation and Operation manual

Bosch Security Systems

Environmental statement - Bosch has a strong commitment towards the environment. This 

unit has been designed to respect the environment as much as possible.

Fuse rating - For protection of the device, the branch circuit protection must be secured with 

a maximum fuse rating of 16A. This must be in accordance with NEC800 (CEC Section 60).

Grounding and polarization - This unit may be equipped with a polarized alternating current 

line plug (a plug with one blade wider than the other blade). This safety feature allows the 

plug to fit into the power outlet in only one way. If unable to insert the plug fully into the 

outlet, contact a locally certified electrician to replace the obsolete outlet. Do not defeat the 

safety purpose of the polarized plug.

Alternately, this unit may be equipped with a 3-pole grounding plug (a plug with a third pin for 

earth grounding). This safety feature allows the plug to fit into a grounded power outlet only. 

If unable to insert the plug into the outlet, contact a locally certified electrician to replace the 

obsolete outlet. Do not defeat the safety purpose of the grounding plug.

Moving - Disconnect the power before moving the unit. Move the unit with care. Excessive 

force or shock may damage the unit and the hard disk drives.

Outdoor signals - The installation for outdoor signals, especially regarding clearance from 

power and lightning conductors and transient protection, must be in accordance with NEC725 

and NEC800 (CEC Rule 16-224 and CEC Section 60).

Permanently connected equipment - Incorporate a readily accessible disconnect device 

external to the equipment.

Pluggable equipment - Install the socket outlet near the equipment so it is easily accessible.

–

Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the 

operating ambient temperature of the rack environment may be greater than room 

ambient. Therefore, consideration should be given to installing the equipment in an 

environment compatible with the maximum ambient temperature (Tma) specified by the 

manufacturer.

–

Reduced Air Flow - Installation of the equipment in a rack should be such that the amount 

of air flow required for safe operation of the equipment is not compromised.

–

Mechanical loading - Mounting of the equipment in the rack should be such that a 

hazardous condition is not achieved due to uneven mechanical loading.

–

Circuit Overloading - Consideration should be given to the connection of the equipment 

to the supply circuit and the effect that overloading of the circuits might have on 

overcurrent protection and supply wiring. Appropriate consideration of equipment 

nameplate ratings should be used when addressing this concern.

–

Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. 

Particular attention should be given to supply connections other than direct connections 

to the branch circuit (e.g. use of power strips).

SELV - All the input/output ports are Safety Extra Low Voltage (SELV) circuits. SELV circuits 

should only be connected to other SELV circuits.

Video loss - Video loss is inherent to digital video recording; therefore, Bosch Security 

Systems cannot be held liable for any damage that results from missing video information. To 

minimize the risk of lost digital information, Bosch Security Systems recommends multiple, 

redundant recording systems, and a procedure to back up all analog and digital information.