Bosch 430 Manual De Usuario

en | Operating instructions

Video Recorder 430/451 Series

F.01U.168.054 | v2.0 | 2012.05

Installation and Operation manual

Bosch Security Systems

Various types of events change the way the unit works. These events are:

–

an alarm input signal applied to the unit

–

motion detection in a camera signal

–

a loss of video from one of the cameras

–

an internal alert from the unit itself (i.e. disk failure, temperature alarm)

The way the unit reacts to events depends on how it is programmed.

An event can cause either a trigger or an alarm. A trigger changes the way the unit works but 

does not require a response from the user. An alarm also changes the way the unit works but, 

in addition, usually activates several indicators and requires the user to acknowledge the 

alarm situation.

The unit reacts to an event in any one of the following ways:

–

A beeper sounds.

–

A status message is displayed.

–

An alarm icon is displayed.

–

The border around a cameo changes color to red.

–

An alarm 

 or video loss 

 indicator flashes.

–

An output relay is activated.

–

A motion 

 indicator flashes.

–

The view modes on the monitors change.

–

A controllable camera might be moved to a pre-defined position.

–

Recording behavior changes.

–

The unit changes the way it operates via pre-defined profiles.

Triggers and alarms can change background tasks that a user may not notice. Unit responses 

that are not visible to the user are, for example, a change in recording speed, the activation of 

the output relay, and event logging. The unit can also be configured to record upon the 

activation of an alarm input. A trigger may change the way the camera images are displayed on 

the monitors without requiring intervention.

–

Monitors A and B can switch to a pre-programmed view mode.

–

Monitor A: The border around the displayed cameos is red. The alarm icon is displayed in 

the corresponding cameo. An alarm status message is displayed.

–

Monitor B: Full screen or sequenced display of pre-programmed cameras.

–

The alarm beeper sounds. The alarm 

 indicators flash.

–

A controllable camera might be moved to a pre-defined position.