Coleman 2000000436 Prospecto

The Coleman Company, Inc. • 3600 N. Hydraulic • Wichita, Kansas 67219

1-800-835-3278 • www.coleman.com

MADE IN CHINA • PRINTED IN CHINA

© 2007 The Coleman Company, Inc.

Coleman

®

and               are registered trademarks of The Coleman Company, Inc.

09/07

•  Under certain conditions (cold weather, high humidity, etc.) condensa-

tion will form on the inside of your tent. Condensation is caused by 
water vapor from your breath, perspiration, or any wet clothing inside 
the tent. It is NOT LEAKAGE through the tent fabric. It can be minimized 
by removing wet clothing from your tent and by providing good ventila-
tion through the tent.

•  Never store tent, even for a short period of time, without drying it

thoroughly and brushing off caked dirt. Do not pack stakes or poles 
inside your tent. Use a separate storage bag.

•  Stakes should be removed by pulling on the stake itself. Never pull on 

the tent to remove stake.

•  TENT POLES SHOULD NOT BE LEFT TELESCOPED TOGETHER

DURING STORAGE.

•  Do not leave your tent set-up for weeks at a time. Be aware that exposure

to ultraviolet rays from the sun can seriously damage material and/or 
cause it to become discolored.

This tent meets the flammability requirements of CPAI-84. The
fabric may burn if left in continuous contact with any flame source.
The application of any foreign substance to the tent fabric may
render the flame-resistant properties ineffective.

1. All stakes and the main pole must to be placed in the storage

bags to prevent damage to the fabric items placed in the 
carry case.

2. Make sure tent is clean and dry before placing in carry case.
3. Neatly fold tent and rainfly, place main pole and stakes in 

storage bags, then roll tightly and place in carry case.

4. Store in a clean, dry area.

STITCH LINE

4. Pull down the two vestibule flaps on the rainfly after all 

seven hook & loop fasteners are secured.

5. Attach the hooks on the rainfly to the plastic loops on the 

four corner web straps (Fig. 8), and the metal loops on the 
sides of the tent.

6. Locate the elastic loop, on the back of rainfly, stretch until 

taut, and secure with a stake.  

7. Tie guylines (5 total) onto web straps located on the sides 

and back of the rainfly, stretch until taut, and secure with 
stakes. (Fig 9 & 10)

(continued)

The vestibule, on the front of the rainfly, provides privacy and
space for gear storage. Both flaps may be rolled back and
secured for maximum air flow. 
1. Unzip rainfly vestibule, roll up one or both flaps, then insert 

toggle through fabric loop to secure. (Fig. 11 & 12)

2. If using as a windbreak: select one flap, stretch elastic cord 

until taut, then secure with a stake (Fig. 13). Roll the other 
flap back and secure by inserting toggle through fabric 
loop. (Fig. 12)

(continued)

Your tent has a unique window vent feature. The window flap
on the rainfly as well as the window on the tent can both be
unzipped and rolled up for unobstructed airflow or viewing.
3. Unzip the rainfly window flap and/or the tent window, roll up 

one or both flaps, then insert toggle through fabric loops to 
secure. (Fig. 14)