Coleman 2000000437 Prospecto
6. Insert one end of red main pole
into first grommet in web straps
at front corner of tent.
(Fig. 2 & 2A)
at front corner of tent.
(Fig. 2 & 2A)
7. Go to opposite end of red main
pole and gradually apply pressure
to the pole forming an arch.
Insert the end of pole into first
grommet at the back corner of
tent. (Fig. 2 & 2A)
to the pole forming an arch.
Insert the end of pole into first
grommet at the back corner of
tent. (Fig. 2 & 2A)
8. Repeat for second red main pole.
9. Insert one end of silver cross
9. Insert one end of silver cross
pole into grommet in web strap
at side of tent. (Fig. 2 & 2B)
at side of tent. (Fig. 2 & 2B)
10. Go to opposite end of silver
cross pole and gradually apply
pressure to the pole forming an
arch. Insert the end of pole into
the grommet at other side of
tent. (Fig. 2)
pressure to the pole forming an
arch. Insert the end of pole into
the grommet at other side of
tent. (Fig. 2)
11. Repeat for second silver cross
pole forming an “X”. (Fig.2)
STITCH LINE
HELIOS
TM
X
3
MODEL 2000000437
Before you begin
Read all instructions before set up.
• Select a level campsite clear of rocks, branches, and other hard
or sharp objects, to install your tent.
• Select a level campsite clear of rocks, branches, and other hard
or sharp objects, to install your tent.
WARNING: Keep clear of overhead power lines.
• Do not set up your tent under trees.
• For best results in windy conditions, position end of tent into
• For best results in windy conditions, position end of tent into
the wind.
• Enlist the help of at least one other person to assist you when
it is time to assemble the tent.
To Set Up Tent
1. Unfold tent and spread out on a
clean, level surface with the doors
facing the desired direction. (Fig. 1)
facing the desired direction. (Fig. 1)
2. Stretch corners of tent until floor is
taut then hammer stakes through
loops on web straps to secure.
(Fig. 1A )
loops on web straps to secure.
(Fig. 1A )
3. Assemble two red main poles and
two silver cross poles by interlocking
the shock-corded poles.
the shock-corded poles.
4. Insert red main poles through
sleeves with red trim in top of tent
forming an “X” as shown. (Fig. 1)
5. Insert silver cross poles through
sleeves with silver trim in top of tent.
NOTE: Make sure the silver
poles pass through the cutouts in the
red trimmed sleeves and under the
red main poles. (Fig. 1 & 1B)
NOTE: Make sure the silver
poles pass through the cutouts in the
red trimmed sleeves and under the
red main poles. (Fig. 1 & 1B)
Parts and Components
Description
Part Number
Main Poles, Red (2)
5010000521
Cross Poles, Silver (2)
5010000523
Vestibule Poles, Gold (2)
5010000522
Rainfly, Orange
5010000525
(continued on other side)
Fig. 1
Door
Red, Shock-corded
Main Poles
Door
Red Trim on Sleeve
1A
Fig. 2
Silver Trim on Sleeve
Silver, Shock-corded
Cross Poles
1B
Silver
Cross Pole
Cutout in Red Sleeve
Door
2A
2B
Red Main
Pole in first
grommet
12. Attach frame clips along edges of tent to red and silver poles. (Fig. 2 & 2B)
13. Clip plastic hooks, located on both sides of tent, to secure silver cross poles together as shown. (Fig. 2 & 2C)
14. Stretch sides of tent until floor is taut then hammer stakes through loops on web straps to secure.
13. Clip plastic hooks, located on both sides of tent, to secure silver cross poles together as shown. (Fig. 2 & 2C)
14. Stretch sides of tent until floor is taut then hammer stakes through loops on web straps to secure.
2C
Stake through
loop
Stake through
loop