Coleman 13 x 11 Prospecto

Connect Frame to Tent

–Insert one end of main tent pole

onto pin, of pin & ring system, at 
tent corner. (illus. 4)

–Go to opposite end of pole and 

gradually apply pressure to the pole 
forming an arch until you are able to 
insert the pin into the pole.

–Repeat for second pole.

13 x 11 Outsider

™

Tent

1

Layout & Positioning 
of Tent, Pole Assembly

–Layout and position tent with door 

facing desired direction. (illus. 1)

–Unzip door.
–Stake down tent corners, and tent 

sides using the rings at the end of the 
stake loops and the side stake loops.
(illus 2) Keep the floor taut.

–Assemble frame poles by interlocking 

shock-corded poles. This will make two
long poles.

–Insert the poles diagonally into pole 

sleeves.The center of the poles should
cross forming an “X” in the middle of
tent. (illus. 1)

–Fasten frame tie on top of tent over 

both poles. (illus. 1), (illus. 3)

2

–Select a level campsite clear of rocks, 

branches and other hard or sharp objects.

–Do not set up your tent under trees.
–For best results in windy conditions, do not 

position the door of tent into the wind.

–See owners manual for more tips.

Assembled poles

inserted through 

pole sleeves

Frame tie

Instructions apply to Part Number 9261A131

illus. 1

illus. 2 

Tent stake

through ring

illus.4

Insert pole tip onto 
pin & ring

Tent frame 

set-up

illus. 3 

Frame tie

Part No. 9261-831

Part No. 9261-832