Coleman 2000001107 Prospecto

4. Insert one end of each 

black pole into pins in 
front corners of tent.
(Fig. 2)

5. Go to opposite end of 

each pole and gradually 
apply pressure to the pole
forming an arch. Insert 
the pin into the pole end 
at the corners of tent. 
(Fig. 3)

6. Attach frame clips along 

edges of tent to black 
main poles. (Fig. 3A)

7. Stretch corners and sides 

of tent until floor is taut 
then hammer stakes 
through loops to secure. 
(Fig. 3B)

STITCH LINE

Read all instructions before set up.
• Select a level campsite clear of rocks, branches, and other hard

or sharp objects, to install your tent.

•  Do not set up your tent under trees.
•  For best results in windy conditions, position end of tent into

the wind.

•  Enlist the help of at least one other person to assist you when 

it is time to assemble the tent.

1. Unfold tent and spread out on a clean, 

level surface with the door facing the 
desired direction. (Fig. 1)

2. Assemble two main tent poles by inter-

locking the longer, black shock-corded, 
poles.

3. Insert both, long, black poles through 

sleeves in top of tent as shown. (Fig. 1)

Main Poles, Long, Black (2)

5010000377

Ridge Pole w/rubber tips, Black (1)

5010000378

Rainfly

5010000379

1. Assemble the black interlocking shock-corded ridge pole with 

rubber tips.

2. Unfold rainfly. Locate the web pockets on front and back of rainfly, 

and the hook & loop fasteners on the underside of rainfly. 

3. Insert rubber-tipped ends of ridge pole into web pockets located 

on both sides of underside of the rainfly. (Fig. 4)

4. Locate hook & loop fasteners on the rainfly

and wrap around black ridge pole to secure.
(Fig. 4A) 

(continued on other side)

Door

Long, Black,

Shock-corded

Main Poles

Web

Pocket

Black Ridge Pole

Black Ridge

Pole