Coleman 2000001132 Prospecto

4. Insert one end of each main pole into pins 

in front & back corners of tent. (Fig. 2A)

5. Go to opposite end of each pole and gradu-

ally apply pressure to the pole forming an 
arch. Insert the pin into the pole end at the 
corners of tent. (Fig. 2 & 2A)

6. Attach frame clips along edges of tent to 

main poles. (Fig. 2B)

7. Stretch corners and sides of tent until floor 

is taut then hammer stakes through loops 
to secure. (Fig. 2C)

STITCH LINE

TM

Read all instructions before set up.
• Select a level campsite clear of rocks, branches, and other hard
or sharp objects, to install your tent.

•  Do not set up your tent under trees.
•  For best results in windy conditions, position end of tent into

the wind.

•  Enlist the help of at least one other person to assist you when 

it is time to assemble the tent.

1. Unfold tent and spread out on a clean, 

level surface with the door facing the 
desired direction. (Fig. 1)

2. Assemble two main tent poles by inter-

locking longer, black shock-corded, 
poles.

3. Insert  main poles through sleeves in 

top of tent forming an “X” as shown. 
(Fig. 1)

Main Poles, Long, Black (2)

5010000509

Vestibule Pole, Thin, Black (1)

5010000510

Rainfly

5010000511

1. Assemble the shock-corded, long, vestibule pole. 
2. Unfold rainfly; then drape over tent with vestibule flaps positioned on both sides of the door. (Fig. 3) 
3. Slide the vestibule pole through sleeve 

under front edge of rainfly. (Fig. 3)

4. Locate all hook and loop fasteners on 

underside of rainfly; then wrap around
the main pole to secure. (Fig. 3A)  

(continued on other side)

Door

Vestibule

Pole

Sleeve on Front

of Rainfly

Long, Black,

Shock-corded

Main Poles

Main Poles

Vestibule Flaps

Door

Door