COBY electronic TFDVD1595S3 Manual De Usuario

Connect cables.(Refer to the “Cable Connections” section for details).

1. 

Press the POWER button to turn on the player.

2. 

Select the TV signal mode, using the SOURCE button.

3. 

Press  the  CH+/-  buttons  to  skip  channels.  Or  you  can  press  the  number  buttons  to  input  channels 

4. 

directly. For an initial use, you need to scan channels under the Channesl Menu. 

 

In the Channels menu, select "Auto Channels Search", press OK to enter - - > Set the TV source as    
Antenna/Cable (ATV/DTV) - - > Select "Start", press OK to scan. To quit, press MENU.

 

Note:  Menu  option  availability  is  dependent  on 

the TV’s  current  input  source  mode.  Options  that 

are grayed out are not selectable from the current 

mode.

  - Setup the picture mode as Custom/Sports/Theater/Energy Savings/

Standard/Vivid.

Brightness/Contrast/Color/Tint/Sharpness  -  Press  the  left/right  direction 
button to adjust settings. When you select a picture Mode other than "Custom",  
these items are automatically given parameters to correspond with the chosen 
preset mode, so any change to these parameters would return the Mode setting 
to “Custom”

Advanced Video  - Press the right button to enter this option.

     Aspect Ratio

 - Set the screen aspect ratio as Normal/Zoom/Wide/Cinema.

    Color Temperature

 - Set color preference as Cool/Normal/Warm.

    Noise Reduction - Set the noise reduction function as Off/Low/Middle/Right. 

    Adaptive Contrast - Set the adaptive contrast function on/off.

Reset  Picture  Settings   -  Select  this  item  and  press  OK  or  the right direction 

button to set all items under this menu to the factory default.

Various  features  can  be  preset  through  the  setup 
menu, 
please read this section carefully.

Press  MENU  to  display  the  system  menu 

• 

window.

Press  the  left/right  direction  button  to  select  the 

• 

desired menu, press the down direction button or 
the OK button to enter.

While working with the menu,
Always use direction buttons to select an option, 
press OK to confirm. Press MENU to back up/exit 
the setup menu, or press EXIT to quit.