Toshiba 1805 Manual De Usuario

214

If Something Goes Wrong
Resolving a hardware conflict

If you are starting the computer from a diskette, the diskette in the 
drive does not have the files necessary to start the computer. 
Replace it with a bootable diskette.

Try another diskette. If you can access the second diskette, the first 
diskette (not the drive) is probably causing the problem. Run 
ScanDisk on the faulty diskette (for instructions, see 

Make sure the drive tray has closed properly. Press gently until it 
clicks into place.

Open the drive tray and remove the disc. Make sure the drive tray 
is clean. Any dirt or foreign object can interfere with the laser 
beam.

Examine the disc to see whether it is dirty. If necessary, wipe it 
with a clean cloth dipped in water or a neutral cleaner.

Replace the disc in the tray. Make sure it is lying flat, label side 
uppermost. Press the disc down until it locks on the spindle. Close 
the drive tray carefully, making sure it has shut completely.

Make sure the computer is connected to a power source and turned 
on. The CD-ROM/DVD-ROM drive eject mechanism requires 
power to operate.

To remove a disc without turning on the computer, use a narrow 
object, such as a straightened paper clip, to press the manual eject 
button. This button is in the small hole next to the disc eject button 
on the right side of the computer.