Toshiba 1805 Manual De Usuario
219
If Something Goes Wrong
Resolving a hardware conflict
Make sure the printer cable is firmly attached to the computer and
the printer.
the printer.
If your printer is ECP- or IEEE 1284-compliant, make sure you
have an IEEE 1284 printer cable.
have an IEEE 1284 printer cable.
Check that the printer has plenty of paper. Some printers will not
start printing when there are just two or three sheets of paper left in
the tray.
start printing when there are just two or three sheets of paper left in
the tray.
Run the printer’s self-test to check for any problem with the printer
itself.
itself.
Make sure you installed the proper printer driver, as shown in
Try printing another file. For example, you could create and
attempt to print a short test file using Notepad. If a Notepad file
prints correctly, the problem may be in your original file.
attempt to print a short test file using Notepad. If a Notepad file
prints correctly, the problem may be in your original file.
Contact your network administrator if the printer is on your office
network.
network.
The printer will not print what you see on the screen.
Many programs display information on the screen differently from
the way they print it. See if your program has a print preview
mode. This mode lets you see your work exactly as it will print.
Contact the software manufacturer for more information.
the way they print it. See if your program has a print preview
mode. This mode lets you see your work exactly as it will print.
Contact the software manufacturer for more information.
Modem problems
This section lists common modem problems.
The modem will not receive or transmit properly.
Make sure the RJ11 cable (the one that goes from the modem to
the telephone line) is firmly connected to the computer’s modem
the telephone line) is firmly connected to the computer’s modem
port and the telephone line socket.