Toshiba 1805 Manual De Usuario
90
Learning the Basics
Setting up for communications
Setting up for communications
Using a wireless connection
NOTE: Using this functionality requires an optional Wi-Fi™
module.
module.
If you do not have a Wi-Fi™ module installed, you will need
to connect using a PC Card device.
to connect using a PC Card device.
For information on how to set up a wireless connection, refer to
your wireless networking device documentation or your network
administrator.
your wireless networking device documentation or your network
administrator.
Connecting your computer to a network
You can connect your computer to a network locally or remotely.
❖
Locally, using the built-in 10/100 Ethernet LAN adapter by
connecting it to a standard RJ45 LAN line, or by using the
optional Wi-Fi module. For more information about wireless
networking, refer to your network administrator.
connecting it to a standard RJ45 LAN line, or by using the
optional Wi-Fi module. For more information about wireless
networking, refer to your network administrator.
❖
Remotely, using the built-in modem and a dial-up connection.
For specific information about connecting to the local area
network (LAN) or wide area network (WAN), consult your
network administrator.
For specific information about connecting to the local area
network (LAN) or wide area network (WAN), consult your
network administrator.
Setting up a modem connection
NOTE: It is recommended that you do not use the infrared
port at the same time as either playing audio or connecting
to the internet via a modem. Audio quality may be reduced
and the modem connection may be slower or disrupted.
port at the same time as either playing audio or connecting
to the internet via a modem. Audio quality may be reduced
and the modem connection may be slower or disrupted.
To use a dial-up connection, have your network administrator
configure your computer for the network and supply you with the
configure your computer for the network and supply you with the