Polycom 3725-22370-001/B Manual De Usuario
LAN Properties
To configure LAN properties:
1. Log on to the QSX Admin Web as described on
Page 23
.
2. Go to Admin Settings > LAN Properties.
3. Configure these settings:
3. Configure these settings:
Setting Description
Host Name
(default: serial number)
(default: serial number)
Indicates the system’s DNS name. If you change the
Host Name, the system restarts.
Host Name, the system restarts.
IP Address
(default: Obtain IP address automatically)
(default: Obtain IP address automatically)
Specifies how the system obtains an IP address.
• Obtain IP address automatically — Select if the
system gets an IP address from the DHCP server on
the LAN.
• Enter IP address manually — Select if the IP
address will not be assigned automatically.
• Obtain IP address automatically — Select if the
system gets an IP address from the DHCP server on
the LAN.
• Enter IP address manually — Select if the IP
address will not be assigned automatically.
Your IP Address is
or
Use the Following IP Address
or
Use the Following IP Address
Displays the IP address currently assigned to the
system if the system obtains its IP address
automatically.
Allows you to enter the IP address for the system if
Enter IP address manually is selected.
system if the system obtains its IP address
automatically.
Allows you to enter the IP address for the system if
Enter IP address manually is selected.
DNS Servers
Displays the DNS servers currently assigned to the
system. If the system does not automatically obtain
a DNS server address, enter up to four DNS servers
here.
system. If the system does not automatically obtain
a DNS server address, enter up to four DNS servers
here.
Default Gateway
Displays the gateway currently assigned to the
system. If the system does not automatically obtain
a gateway IP address, enter one here.
system. If the system does not automatically obtain
a gateway IP address, enter one here.
Subnet Mask
Displays the subnet mask currently assigned to the
system. If the system does not automatically obtain
a subnet mask, enter one here.
system. If the system does not automatically obtain
a subnet mask, enter one here.
WINS Server
Displays the WINS server currently assigned to the
system. If the system does not automatically obtain
a WINS server IP address, enter one here.
system. If the system does not automatically obtain
a WINS server IP address, enter one here.
WINS Resolution
(default: disabled)
(default: disabled)
Sends a request to the WINS server for WINS name
resolution.
resolution.
LAN Speed
(default: Auto)
(default: Auto)
Specifies the LAN speed to use. Note that the speed
you choose must be supported by the switch.
Choose Auto to have the network switch negotiate
the speed automatically. If you choose 10 Mbps or
100 Mbps, you must also select a duplex mode.
you choose must be supported by the switch.
Choose Auto to have the network switch negotiate
the speed automatically. If you choose 10 Mbps or
100 Mbps, you must also select a duplex mode.
Duplex Mode
(default: Auto)
(default: Auto)
Choose Auto to have the network switch negotiate
the Duplex mode automatically, or specify the
Duplex mode to use. Note that the Duplex mode you
choose must be supported by the switch.
the Duplex mode automatically, or specify the
Duplex mode to use. Note that the Duplex mode you
choose must be supported by the switch.
38