DISH Network Solo 351 Guía Del Usuario

The 

audio/video outputs provide high 

picture quality and stereo sound to your TV (if 

your TV has these connections). These outputs 

can be used to provide TV2 menus and 

programming to a wireless audio/video transmitter 

or to a second input on a nearby TV. Use an RCA-

type cable assembly to make the connection. If the 

TV has only one input for this type of audio, 

connect it to the right (R) phono (RCA) audio 

output on the receiver.

The 

 connections are used to 

receive satellite TV signals from the dish 

antenna. The connection is made using 

RG-6 coaxial cable. The 

 

connections are color coded blue.

The 

 port receives UHF signals from 

the Remote Control 2 so that it can control TV2 menus 

from another room. Connect the UHF antenna here, 

and place it so that it does not touch anything. If you 

do not connect the antenna, you cannot use Remote 

Control 2 to control the receiver for TV2 menus and 

programming. The 

port is

color 

coded green.

The 

 is used to connect the receiver to an 

active telephone line. Use a standard RJ-11 telephone 

cable assembly to make the connection.

The two remote controls give you easy access to all the features of your 

satellite receiver. You can set up each remote to control the satellite receiver 

and up to three other devices. These devices can be a TV, a VCR or DVD 

player, and a third device.