DISH Network 622 Manual De Usuario

Shared View is a feature of Single Mode that lets you activate the TV2 audio and video 
outputs to display the same programming as the TV1 outputs. While using this feature, 
both the Remote Control 1 and Remote Control 2 for your satellite receiver can control 
what is displayed on all TVs connected to the system. This feature is available only in 
Single Mode.

Note: Make sure you are using Remote Control 1 and TV1 because you cannot enable or 
disable this feature using Remote Control 2.

Note: If you do not want to display programming on any other TV besides TV1 and you do 
not want Remote Control 2 to control the receiver, select Disable View. After you select 
Done, TV2 will show a screen that says Shared View is currently disabled.

If you have TV1 and TV2 connected to the receiver with coaxial cables (see page 97), you 
can decide which channel you’d like to use to view your DISH Network programming. If 
you have the system locked, you’ll have to enter the password to enable TV1’s output on 
this screen. Make sure your TV can tune to the channel you pick before you change the 
setting on this screen.

You can display your photos on your television through your DISH Network receiver. Now 
you don’t have to pass photos around or have a crowd of people hover around your digital 
camera.

Chapter 11 Two Color.fm  Page 86  Monday, December 19, 2005  1:02 PM