Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Samsung
  4. CLX-6240FX
  5. Manual De Usuario

Samsung CLX-6240FX Manual De Usuario

Descargar
Página de 161
Using Your Printer with a Macintosh
42
Using SetIP program
This program is for the network IP setting using the MAC 
address which is the hardware serial number of the network 
printer card or interface. Especially, it is for the network 
administrator to set several network IPs at the same time. 
You can only use SetIP program when your machine is 
connected to a network.
SetIP program should be automatically installed during the 
printer driver installation.
N
OTE
: If you select Typical installation for a network 
printer during the printer driver installation, the SetIP 
program automatically runs after the installation. Follow the 
below instruction.
1
The certificate window appears, click Trust.
2
Print the machine’s network information report which 
includes your machine’s MAC address.
3
Click 
 
in the SetIP window to open the TCP/IP 
configuration window.
4
Enter the network card's MAC address, IP address, subnet 
mask, default gateway, and then click Apply.
N
OTE
: when you enter the MAC address, enter it without 
colon(:).
5
The machine prints the network information. Confirm all 
the settings are correct.
6
Close the SetIP program.
Starting the program
If you want to change your network printer IP setting, follow 
the below instruction.
1
Print the machine’s network information report which 
includes your machine’s MAC address.
2
Open the Library folder → Printers → Samsung →  Your 
printer model name → SetIP.
3
Double click the SetIPApplet.html file.
4
The certificate window appears, click Trust.
5
Click 
 
in the SetIP window to open the TCP/IP 
configuration window.
6
Enter the network card's MAC address, IP address, subnet 
mask, default gateway, and then click Apply.
when you enter the MAC address, enter it without colon(:).
7
The machine prints the network information. Confirm all 
the settings are correct.
8
Close the SetIP program.
Setting Up the Printer 
Set up for your printer will be different depending on which 
cable you use to connect the printer to your computer—the 
network cable or the USB cable.
For a Network-connected Macintosh
N
OTE
: 
Some printers do not support a network interface. 
Before connecting your printer, make sure that your 
printer supports a network interface by referring to Printer 
Specifications in your Printer User’s Guide.
1
Follow the instructions on “Installing Software” on page 41 
to install the PPD file on your computer.
2
Open the Applications folder → Utilities, and Print 
Setup Utility.
•For MAC OS 10.5, open System Preferences from the 
Applications folder, and click Printer & Fax.
3
Click Add on the Printer List.
• For MAC OS 10.5, press the “+” icon then a display 
window will pop up. 
4
For MAC OS 10.3, select the Rendezvous tab. 
• For MAC OS 10.4, click Default Browser and find the 
Bonjour.
• For MAC OS 10.5, click Default and find the Bonjour.
The name of your machine appears on the list. Select 
SEC000xxxxxxxxx from the printer box, where the 
xxxxxxxxx varies depending on your machine.
5
For MAC OS 10.3, if Auto Select does not work properly, 
select Samsung in Printer Model and your printer 
name in Model Name. 
• For MAC OS 10.4, if Auto Select does not work properly, 
select Samsung in Print Using and your printer name 
in Model. 
• For MAC OS 10.5, if Auto Select does not work properly, 
select Select a driver to use... and your printer name 
in Print Using. 
Your machine appears on the Printer List and is set as the 
default printer.
6
Click Add.