Samsung CLX-6240FX Manual De Usuario

74 _Troubleshooting

6. To replace the tray, lower the rear edge, align it with the slot, and slide it 

into the machine.

 

7. Open the front cover and close it. The machine will resume printing.

When you print using the Multi-purpose Tray and the machine detects that 

there is either no paper or that the paper has been improperly loaded, follow 

the next steps to release the jammed paper.
1. Check if the paper is stuck in the feeding area, and if so, pull it out gently 

and slowly.

If you cannot find the jammed paper, or if there is any resistance 

removing the paper, stop pulling and go to step 2.

2. Close the multi-purpose tray.
3. Pull the tray out. 
4. Open the inner cover while you are pushing the lever with two hands.

5. Pull the paper out gently.

6. Replace the tray.

If you cannot find the jammed paper, or if there is any resistance 

removing the paper, stop pulling and go to step 8.

7. Using the handle, completely open the front cover.

8. Remove the jammed paper by pulling in the direction shown. To avoid 

tearing the paper, pull it out gently and slowly.

9. Close the front cover firmly. The machine will resume printing.

•

Do not touch the green surface, the OPC drum or the front of 

each toner cartridge, with your hands or any other material. Use 

the handle on each cartridge in order to avoid touching this area.

•

Be careful not to scratch the surface of the paper transfer belt.

•

If you leave the front cover open for more than a few minutes, the 

OPC drum can be exposed to light. This will cause damage to the 

OPC drum. Close the front cover should the installation need to 

be halted for any reason.

If the front cover is not completely closed, the machine will not 

operate.