DISH Network Solo 301 Manual De Usuario

8. If the 

 screen is not displayed on the TV, press 

MENU-6-1-1 

on the remote control.

9. Select 

. When an attention screen displays, select 

.

10. The receiver begins performing the 

 tests. When it is 

finished, the 

 screen displays.

11. Make sure that the information on the 

 screen 

identifies your system correctly and shows all transponders for all sat-
ellites in your system. 

12. Select 

 to go to the 

 screen.

13. Select 

. An 

 screen will open asking the mounting and 

positioning of your dish is complete with a 

 indication in the 

 screen. Select 

. 

14. After you select 

, the receiver will begin taking a software 

upgrade. You will see a 

 that vital program information will 

now be downloaded into your receiver. You will also see a status bar 
showing the progress of this upgrade.

15. Once the software upgrade is complete, you will see a message that 

your receiver’s memory is being upgraded.

16. Do not disturb the receiver while the receiver’s memory is being 

upgraded.

: If you are installing other DISH Pro receivers, be sure to run 

 on all of them, and allow them to take the necessary software 

upgrade.

17. When the memory upgrade is complete, you will either be watching 

TV or you will see a message asking you to activate your receiver. 

18. If you are asked to activate your receiver, go to page 2 and follow the 

instructions.