3com V7111 Manual De Usuario

 

V7111 MGCP Quick Setup Screen 

 

To configure basic MGCP parameters, follow these 10 steps: 

If your network features a DNS server, in the fields ‘DNS Primary Server IP’ and ‘DNS 
Secondary Server IP’, enter the IP address of the primary and secondary DNS servers 
(clarify with your network administrator). Note that the DNS server option is not 
supported by MGCP. 

If your network features a DHCP server, in the ‘Enable DHCP’ field, select ‘Enable’; the 
‘IP Address’, ‘Subnet Musk’ and ‘Default Gateway IP Address’ fields are disabled. When 
the gateway is configured to use DHCP, it attempts to contact the DHCP server to obtain 
the networking parameters (i.e., IP address, subnet mask, default gateway and 
primary/secondary DNS server). 

Select ‘MGCP’ in the ‘Control Protocol Type’ field. 

In the ‘Call Agent IP’ field, enter the Call Agent IP address if your enterprise’s network 
doesn’t feature a DNS server that automatically defines the Call Agent’s IP address. If 
you have a DNS server, the field is optional. 

In the ‘Call Agent Port’ field, enter the Call Agent port. The default is 2427. 

In the ‘Call Agent Domain Name’ field, enter the Call Agent domain name. When using 
the DNS server option, enter the domain name of the Call Agent operating with the 
V7111. The DNS server automatically detects the Call Agent’s IP address from the 
domain name. 

3Com VCX V7111 Analog Gateway Installation Guide 

 33