Avaya IP Office Phone Manual De Usuario

Dimensions 
(unboxed) 

IP401: 

Width: 255mm (10").   Height: 71mm (2.8")   Depth: 235mm (9.3") 

IP403/6/12 & Exp. Modules :  Width: 445mm (17.5")  Height: 71mm (2.8")   Depth: 245mm (9.7") 

Dimensions 
(boxed) 

IP401: 

Width: 304mm (13.4")   Height: 105mm (4.2")   Depth: 305mm (12") 

IP403/6/12 & Exp. Modules :  Width: 445mm (17.5")  Height: 71mm (2.8")   Depth: 245mm (9.7") 

Environmental 

0 to +40

°C. 95% relative humidity, non-condensing. 

Weight (unboxed) 
Kgs 
lbs 

401  403  406  412  Analog16 

DT/DS16   DT/DS30   WAN3   So8  Phones8 …16  …30  

 
1.2  2.6 3.0 3.0 

2.9 

3.0 

3.50 2.8 

2.8 

2.8 

2.9 

3.10 

2.6  5.8 6.6 6.7 

6.5 

6.7 

7.8 6.3 

6.3 

6.3 

6.5 

6.94 

Weight (boxed) 
Kgs 
lbs 

401  403  406  412  Analog16 

DT/DS16   DT/DS30   WAN3   So8  Phones8 …16  …30  

 
2.4 3.85 4.3 4.3 

4.2 

4.3 

4.8 

4.1 4.1  4.1 4.2 4.4 

5.4  8.6 9.6 9.6 

9.4 

9.6 

10.8 

9.2 9.2  9.2 9.4 9.7 

Power Supply 
Consumption 
(nominal Watts) 

2.5mm DC inlet socket. 24Vdc Power input. Rating  24Vd.c., 2A max. 

 401  403 

406412  Analog16 

DT/DS16   DT/DS30   WAN3   So8  Phones8 …16  …30  

24 

26 16 

17.5  5 

24 

30 

12 24  12 16 30 

Lump-in-Line PSU  Power Requirements: I/P 100-240Vac, 50/60Hz, 81-115VA, Input current 2A max 

Standard PSUs: O/P 24Vdc, 1.875A, output power 45W max. 
DS30 80W PSU: O/P 16Vdc, 5A, output power 80W max. 
Lump-in-line PSUs are CE/UL/Dentori Safety Approved.  

 

DTE 

25 way D-Type female connector, V.24/V.28. (9 way D-type on IP412s) 

ISDN  

ROW Interfaces: 
BRI :  

RJ45 sockets. ETSI S/T Interface to CTR3 for Pan European Connection. 

PRI E1:  

RJ45 socket. ETSI T Interface to CTR4 for Pan European Connection. 

PRI E1-R2:  RJ45 socket. ETSI T Interface to CTR4 for Pan European Connection. 
PRI E1-R2:  75

Ω BNC Coax.. ETSI T Interface. 

PRI T1:  

RJ45 socket: FCC Part 68/JATE connection. 

USA Interfaces: 
PRI T1 Service:  

Ground Start (GS) – Default, E&M, 56k data for 5ESS, 56/64/64 restricted for 4ESS 

PRI ISDN Switch support:  

4ESS, 5ESS, DMS-100, DMS-250 (includes conformance to ANSI T1.607 & Bellcore 
Special Report SR4287, 1992 

PRI ISDN Services:  

AT&T Megacom 800, AT&T WATS (4ESS), AT&T SDS Accunet 56kB/s & 64kB/s (4ESS), 
AT&T Multiquest (4ESS). 

Analog ports 

RJ45 sockets: Loop start/Ground start (region dependant) 

Power Fail ports 

RJ45 sockets: telephone ports act as master sockets 

ISDN  
Data Rates 

BRI: B-channel 64kbps or 56kbps, D-channel 16kbps. 
PRI: B-channel 64kbps or 56kbps, D-channel 64kbps. 

Telephone 

RJ45 sockets. EU - Telephone ports act as master sockets. 
CLI Schemes: DTMFA, DTMFC, DTMFD, FSK and UK20.  
REN  = 2 
Off Hook current = 25mA. 
Ring Voltage = 40V (nominal) RMS. 
External Bell (via analog port); REN = 1 

LAN 

RJ45 sockets. Auto-negotiating 10/100BaseT Ethernet (10Mbps).  
Port 8 is MDI/MDIX switchable via the adjacent Cascade pushbutton switch.   
Refer to pages 11, 15 and 19. 

WAN 

37 way D-Type female sockets. X.21 interface to 2048k bps, V.35 interface to 2048k bps and 
V.24 Interface to 19k2 bps.  

Audio 

3.5mm Stereo Jack socket. Input impedance - 10k /channel. 
Maximum a.c. signal – 200mV rms. 

External  
Control 

3.5mm Stereo Jack socket. Switching Capacity - 0.7A. 
Maximum Voltage - 55V d.c. On state resistance - 0.7

Ω. 

Short circuit current - 1A. Reverse circuit current capacity - 1.4A.