Lucent Technologies 555-661-150 Manual De Usuario

Descargar
Página de 360
MERLIN LEGEND Communications System Release 6.1
Network Reference  
555-661-150  
Issue 1
August 1998
Glossary 
Page GL-27
 
U
trunk
Telecommunications path between the communications 
system and the telephone company central office (
CO) or 
another switch. Often used synonymously with 
line.
trunk jack 
Se
trunk pool
Se
TSAPI
Telephony Services Application Programming Interface. 
An application programming interface that allows computer 
telephony applications to be used. TSAPI is supported by 
the MERLIN LEGEND Communications System Release 
5.0. 
See also TAPI, CTI.
TTR 
(touch-tone receiver) Device used to decode 
DTMF touch-
tones dialed from 
single-line or Remote Access telephones.
UDP
(Uniform Dial Plan) Composed of the
 local dial plan and 
non-local dial plan. A dial plan that allows a caller at any 
extension in a 
private network to dial the same number of 
digits to reach any other extension in the private network, 
even if the originating extension is physically connected to 
one communications system and the terminating extension 
is physically connected to a different communications 
system.
unambiguous 
numbering
The practice of numbering of extension ranges, remote 
access codes, or other system components to avoid routing 
conflicts in network or local calling. For example, Extension 
441 is unique when compared to Extension 4410. However 
it is ambiguous, because a system routes as soon as it 
matches the digits sent for a call with the digits in a local 
plan or in a non-local dial plan extension range. When a 
caller dials 
4410
, a system routes the call to Extension 441 
immediately, without considering the last dialed digit.
Uniform Dial Plan
See 
UDP.
uninterruptible 
power supply
Se
unit load 
Measure of the power load drain of a module, telephone, or 
adjunct.
unmonitored 
extension
An extension for which no CTI application is receiving call 
information. See also 
unrestricted data 
channel
Unrestricted data channels (also called clear data 
channels) allow the transmission of occurrences of more 
than seven contiguous zero bits. If an unrestricted data 
channel is requested and only restricted channels are 
available, the call will be rejected. See also restricted data 
channel.