Linksys SPA 900 Series Manual De Usuario

9.10 Non DHCP Default Route

9.11 Non DHCP DNS 1

9.12 Non DHCP DNS 2

9.13 Non DHCP NTP Server 1

9.14 Non DHCP NTP Server 2

9.15 Multicast Address

9.16 Enable VLAN

9.17 VLAN ID

9.18 CDP

When DHCP is enabled, the phone obtains its IP address from a DHCP server.

To view DHCP status, press the Setupbutton and press 9, or scroll down to the Network option and press 
the select soft key. The displays shows 1 DHCP Enable with a Yes or No to indicate the current status. 

To enable or disable DHCP, press the edit soft key and press the y/n soft key to toggle between Yes and 
No. After making the selection, press the ok button and the display returns to the Network menu.

To view the current IP address, press 2 on the Network menu, or scroll down until Current IP Address 
is highlighted and press the select soft key. The Current IP Address is set in one of the following ways:

Receive the address from a DHCP server by enabling DHCP (Option 9.1)

Manually set the address using the Non DHCP IP Address option (Option 9.8)

The Host Name is set by the administrator. The user cannot change the setting.To view the Host Name, 
press 3 from the Network menu, or scroll down to Host Name and press the select soft key. 

The Domain Name displays the name of the domain in which the phone is operating and is not user 
configurable. To view the Domain, press 4 from the Network menu, or scroll down to highlight Domain 
and press select.