Samsung ITP-5107S Manual De Usuario

24

23

4. Dial the location number (e.g., 05) OR

press UP or DOWN to select the location

and press the right soft key to move the 
cursor OR press the left soft key to return
to step 2

5. Enter the trunk access code (e.g., 9)

followed by the number to be dialed 

(e.g., 4264100) OR press the right 
soft key to return to step 2 OR press the 
left soft key to return to step 3 OR press 
HOLD to clear an entry (if an error is made,
use the DOWN key to step back)

6. Press the F key to access 

OR press TRSF to save

and exit programming OR press SPK to save
and advance to the next program

Each individual station user can program his/her own names but in cases where it
is impractical or for single line telephone users, this program allows a system
administrator to view or change any station’s speed dial names. The station speed
dial codes are 00–49. Each station begins with ten numbers (00–09) and can be
assigned more in blocks of ten up to a maximum of fifty numbers.

UP & DOWN - Used to scroll through extension numbers and speed dial bins.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPK - Used to store data and advance to next program.
HOLD - Used to clear previous entry.
ANS/RLS - Used to select ALL.

1. Press TRSF and then dial 106

Display shows

2. Dial the station number (e.g., 205) OR

press UP or DOWN to select the station

and press the right soft key to move the
cursor

3. If the selected station has no speed dial

bins, this display will be shown and a new

station may be selected

4. Dial the speed dial location (e.g., 05) OR

use UP or DOWN to scroll through the

location numbers and use the right soft 
key to move the cursor OR press the left
soft key to return to step 2 above

5. Enter the name using the procedure in 

and press the  

right soft key to return to step 2 OR 
press the left soft key to return to step 3 

6. Press the F key to access Program 

Personal Speed Dial Numbers for 
Other Stations OR press TRSF to 
store and exit programming OR press
SPK to store and advance to the 
next program

The programmed station message feature lets you set a message at your phone to
notify users with Display Phones that you may be out of town. This way, when
Display Phone users call their display will show “OUT OF TOWN”and they will know
why you do not answer.

The OfficeServ 100, OfficeServ 500, and OfficeServ 7000 systems allow 15 mes-
sages to be programmed in the system list in MMC 715 and each station can pro-
gram 5 messages individually.

UP & DOWN - Select the message number.