Avaya 15-601082 Manual De Usuario
Wireless Phone Installation
Wireless Installation and Configuration Guide
Page 31
IP Office
[15-601082] Issue [1] (1 June 2006)
Sample Installation and Configuration
A sample configuration set-up is available following the instructions below.
Note
Before you begin downloading software upgrades, you must create a Spectralink Login and
password.
password.
If you have an IP Office unit, do the following to set-up the wireless phones:
1. To create a VoIP extension on IP Office, you must first download the firmware upgrades for the
phones and the AVPPs from the SpectraLink website: www.spectralink.com/softwareupdates
2. For the 10, 20 or 100 AVPP software, click Infrastructure. In the Product column, locate NetLink
SVP Server, and do the following:
a. Download the .EXE. For the 10 and 20 AVPP, download Netlink SVP Server.exe.
For the 100 AVPP, download Netlink SVP Server_01.exe.
b. Double-click the .EXE file and place the files in the same sub-directory as your
TFTP server is pointed to.
Note
10, 20 and 100 AVPPs will not operate together in a network. The network must consist of
all 10, all 20 or all 100 AVPPs.
all 10, all 20 or all 100 AVPPs.
For the wireless phone software, click Handsets. In the Product column, locate Netlink-
e340/h340/i640-Avaya and do the following:
e340/h340/i640-Avaya and do the following:
a. Download the .EXE.
b. Double-click the .EXE file and place the files in the same sub-directory as your
TFTP server is pointed to.
3. Refer to the manufacturer
’
s documentation to configure the access point with the following
information:
Access Point IP Address
Individual Access Point Name
Frequency Channel
Security Key Information
4. Using a Cat. 5 Ethernet cable, connect the IP Office unit
’
s LAN port to the AVPP
’
s Network port.
5. To configure the AVPP, see AVPP Configuration.
6. Create a VoIP extension for each wireless phone.
7. Configure the wireless phone.