Cisco Systems 7940G Manual De Usuario
6-8
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)
OL-15498-01
Chapter 6 Viewing Model Information, Status, Statistics, and Security Information on the Cisco Unified IP Phone
Status Menu
Firmware Versions Screen
The Firmware Versions screen displays the following information about the firmware running on the
phone:
phone:
•
App Load ID—Version of the phone application running on the phone
•
Boot Load ID—Identifier of the factory-installed load running on the phone
•
Version—Version of the firmware running on the phone
•
DSP—Identifies the digital signal processor (DSP) software version used
•
Expansion Module 1, Expansion Module 2—Identifies the load running on the Expansion Module
or Expansion Modules, if connected to the phone
or Expansion Modules, if connected to the phone
Bcast
Number of broadcast packets received by the phone
One of the following
values:
values:
Initialized
TCP-timeout
CM-closed-TCP
TCP-Bad-ACK
CM-reset-TCP
CM-aborted-TCP
CM-NAKed
KeepaliveTO
Failback
Phone-Keypad
Phone-Re-IP
Reset-Reset
Reset-Restart
Phone-Reg-Rej
Load Rejected HC
CM-ICMP-Unreach
Phone-Abort
Cause of the last reset of the phone
Elapsed Time
Amount of time that has elapsed since the phone last rebooted
Port 1
Link state and connection of the PC port (for example,
Auto 100 Mb
Full-Duplex
means that the PC port is in a link up state and has
auto-negotiated a full-duplex, 100-Mbps connection)
Port 2
Link state and connection of the Network port
Table 6-2
Network Statistics Message Components (continued)
Message Component
Description